Differences

This shows you the differences between two versions of the page.

--- litespeed_wiki:config:admin-ssl [2017/10/24 12:43]
Lisa Clarke [LSWS 5.2+]
+++ litespeed_wiki:config:admin-ssl [2025/06/03 18:28] (current)
Lisa Clarke Redirect to new Documentation Site
@@ Line 1: / Line 1: @@
-====== How To Configure SSL For LSWS Web Admin GUI ======
+~~REDIRECT>https://docs.litespeedtech.com/lsws/webadmin/~~
-**As of LiteSpeed Web Server v5.2, self-signed SSL certificates are automatically created for the Web Admin GUI.**
-The following instructions are useful if an older version of LSWS is being used, a different self-signed certificate is wanted, or a non-self-signed certificate is needed.
-===== Install/Change Certificates =====
-==== LSWS 5.2+ ====
-LSWS reads the following files for its WebAdmin SSL configuration:
-  * Certificate File: ''/usr/local/lsws/admin/conf/cert/admin.crt''
-  * Key File: ''/usr/local/lsws/admin/conf/cert/admin.key''
-  * CABundle: ''/usr/local/lsws/admin/conf/cert/admin.cabundle''
-This configuration can be changed at any time by replacing these files directly.\\
-Make sure the files are owned by ''lsadm:lsadm''. This can be achieved by running the following command:
-<code>
-chown -R lsadm:lsadm /usr/local/lsws/admin/conf/cert/*
-</code>
-Perform a graceful restart after making any changes. The changes will be applied, and Web Admin GUI will begin using the newly-supplied certificate.
-==== All Versions ====
-The following will work for all versions of LSWS via the Web Admin GUI.
-  - Log in to the Web Admin GUI and navigate to Web Console -> Listeners.
-  - Click View/Edit for the adminListener\\ \\ {{ :litespeed_wiki:config:admin-ssl-1.png?nolink&800 |}}
-  - In the General tab, click edit and change Secure from No ->Yes. Then hit save.\\ \\ {{ :litespeed_wiki:config:admin-ssl-3.png?nolink&800 |}} \\
-  - Click on the SSL tab, hit edit under the SSL Private Key & Certificate section, and add the following:
-    * **Private Key File:** ''</path/to/ssl/key_file>''
-    * **Certificate File:** ''</path/to/ssl/cert_file>''
-    * **Chained Certificate:** Yes
-    * **CA Certificate File:** ''</path/to/ssl/ca_bundle>''\\ \\ **Note:** Make sure that these files can be read by lsadm. If not, run chown lsadm:ladm on each file so that the Web Admin GUI can read these files. \\ \\ {{ :litespeed_wiki:config:admin-ssl-4.png?nolink&800 |}} \\
-  - Save and perform  a graceful restart of the web server. The Web Admin GUI should now be using the non-self-signed certificate.\\ \\ {{ :litespeed_wiki:config:brotli:brotli-5.png?nolink&800 |}} \\ {{ :litespeed_wiki:config:brotli:brotli-6.png?nolink&800 |}}