This wiki covers how to set up LiteSpeed Web Server so that a long-running PHP script will not be interrupted before it has finished.
Some PHP scripts need to run for long periods of time without interruption. Examples include WordPress modules such as BackupBuddy, ImportBuddy, or any other module that relies on a WordPress built-in cron job. Whenever a PHP application rebuilds MySQL indexes, the process may run for a long time.
Generally, allowing a PHP script to run forever is not desirable. Thus there are a number of features (in LSWS and built into PHP) that may prevent a PHP process from running long enough to finish. You may need to set up more than one of the following configurations to ensure your application works correctly.
When a user closes a connection (by closing a window, for example), LSWS will abort processing that PHP script by killing the PHP process. This is to avoid wasting system resources and prevent certain types of DoS attacks.
In some cases, though, it is preferable to not to abort the PHP script regardless of whether the connection has been closed. For example, Wordpress built-in cron jobs start a background job by sending a request to wp-cron.php then immediately closing the connection without waiting for response. In order for the cron job to complete, though, the web server must keep the PHP engine running without interruption.
With Apache mod_php, the ignore_user_abort setting allows a user to trigger a long-running process and then close the browser or navigate away from the page without killing the PHP/MySQL process. This setting is not supported by LSWS (or any Apache suEXEC setup).
Aborting for a broken connection can instead be turned off at the server level in LSWS's WebAdmin console or by using LiteSpeed's “noabort” environment variable.
WebAdmin console > Configuration > Server > General > External Application Abort
Set External Application Abort to “No Abort” to stop all applications from aborting even when a connection has been broken.
Aborting for a broken connection can be turned off by using the request-level “noabort” environment variable. This can be done in a rewrite rule or using the SetEnv/SetEnvIf directives. “noabort” is a LiteSpeed-specific environment variable, so all the following rules should be placed in
<IfModule Litespeed> ... </IfModule>
The [E=noabort:1] flag can be added to any rewrite rule. The rewrite rule can be in an Apache .htaccess file or vhost-level configuration file. The rewrite flag should usually be used for a single account only. If you need to do a server-level configuration that will apply to all accounts (though perhaps only for certain scripts), you should use the SetEnvIf directive.
RewriteEngine On RewriteRule .* - [E=noabort:1]
wp-cron.php, backupbuddy.php, and importbuddy.php only.RewriteEngine On RewriteRule (wp-cron|backupbuddy|importbuddy)\.php - [E=noabort:1]
SetEnv noabort 1
wp-cron.php, backupbuddy.php, and importbuddy.php).SetEnvIf Request_URI "(wp-cron|backupbuddy|importbuddy)\.php" noabort
Note: Rewrite rules cannot be easily inherited. Thus, if you want to affect all accounts with one setting, the SetEnvIf directive should be used.
If a script does not send back anything for a long time, this can trigger a connection timeout and the server will close the client connection. This is done to prevent poorly written PHP scripts from tying up the server. To get desired functionality from your web applications, though, you may need to prevent the connection from being timed out. (If the “noabort” environment variable above has been set, the script will continue to run even though the connection has been broken. Your application, though, may require the connection to stay open for correct functionality.)
Connection timeout can be prevented by either increasing the global connection timeout setting (via the WebAdmin console) or using LiteSpeed's “noconntimeout” environment variable.
WebAdmin CP > Configuration > Server > Tuning > Connection Timeout (secs)
This setting can be increased to allow scripts to run longer (though they will still time out after the specified time has elapsed).
If LiteSpeed ADC is running in front , ADC connection timeout also need to adjust.
Similarly to the “noabort” environment variable, you can add the “noconntimeout” environment variable via a rewrite rule or using the SetEnv/SetEnvIf directives. (The rewrite flag is preferred for controlling a single account. The SetEnv/SetEnvIf directives are preferred for rules that will apply to all accounts.) “noconntimeout” is a LiteSpeed-specifc environment variable, so all the following examples should be placed inside:
<IfModule Litespeed> ... </IfModule>
RewriteEngine On RewriteRule .* - [E=noconntimeout:1]
wp-cron.php, backupbuddy.php, and importbuddy.php only.RewriteRule (wp-cron|backupbuddy|importbuddy)\.php - [E=noconntimeout:1]
RewriteRule (wp-cron|backupbuddy|importbuddy)\.php - [E=noabort:1, E=noconntimeout:1]
SetEnvIf Request_URI "(wp-cron|backupbuddy|importbuddy)\.php" noconntimeout
wp-cron.php, backupbuddy.php, and importbuddy.php).SetEnvIf Request_URI "(wp-cron|backupbuddy|importbuddy)\.php" noabort noconntimeout
In ProcessGroup mode, the "LSAPI_MAX_PROCESS_TIME" environment variable (default 3600 seconds) controls the maximum processing time allowed when processing a request. If a child process cannot finish processing the request in the given time period, it will be killed by the parent process. This option can get rid of a dead or a runaway child process.
Set the environment variable in your external application settings (WebAdmin > Configuration > Server(or Vhost) > External App > your external application > Environments).
The max_execution_time setting sets the maximum time in seconds a PHP script is allowed to run before it is terminated by the parser. This helps prevent poorly written scripts from tying up the server. This time does not include time spent in system calls or network I/O (unlike the “LSAPI_MAX_PROCESS_TIME” environment variable above). Thus a process will usually trigger “LSAPI_MAX_PROCESS_TIME” before triggering a max_execution_time setting of a similar length. The default setting is 30.
Example setting (in a php.ini file):
max_execution_time=36000
One of our customers had success making sure a PHP script did not time out by adding the following PHP code:
<?php
//avoid apache to kill the php running
ignore_user_abort(true);
//start buffer output
ob_start();
echo "show something to user";
//close session file on server side to avoid blocking other requests
session_write_close();
//send length header
header("Content-Length: ".ob_get_length());
header("Connection: close");
//really send content, can't change the order:
//1.ob buffer to normal buffer,
//2.normal buffer to output
ob_end_flush();
flush();
//continue do something on server side
ob_start();
//replace it with the background task
sleep(50);
ob_end_clean();
?>
Note: You need to turn off keepalive connections for this request. This can be done with a rewrite rule.
A test.php script sets sleep time to 320 seconds, like so:
?php
//Store the micro time so that we know
//when our script started to run.
$executionStartTime = microtime(true);
// displaying time
echo date('h:i:s')."\n" ;
// delaying execution of the script for 2 seconds
sleep(320);
// displaying time again
echo date('h:i:s');
//At the end of your code, compare the current
//microtime to the microtime that we stored
//at the beginning of the script.
$executionEndTime = microtime(true);
//The result will be in seconds and milliseconds.
$seconds = $executionEndTime - $executionStartTime;
//Print it out
echo "This script took $seconds to execute.";
?>
When it is run, however, it errors out and stops at 300 seconds (5 minutes). phpinfo.php shows max_exectution_time is 600. The script times out due to LiteSpeed Web Server's default 300-second timeout. The default, however, can be overridden by a noabort or noconntimeout rule.
In this example, .htaccess does have a noabort rule, but the test script still stops at 300 seconds:
Oct8ne
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteRule ^oct8ne/frame/([a-zA-Z]+)$ index.php?fc=module&module=oct8ne&controller=oct8neconnector&octmethod=$1&%{QUERY_STRING} [QSA,L]
</IfModule>
#End_Oct8ne
# ~~start~~ Do not remove this comment, Prestashop will keep automatically the code outside this comment when .htaccess will be generated again
# .htaccess automaticaly generated by PrestaShop e-commerce open-source solution
# http://www.prestashop.com - http://www.prestashop.com/forums
<IfModule mod_rewrite.c>
<IfModule mod_env.c>
SetEnv HTTP_MOD_REWRITE On
</IfModule>
RewriteEngine on
#
RewriteRule . - [E=REWRITEBASE:/]
RewriteRule ^api$ api/ [L]
RewriteRule ^api/(.*)$ %{ENV:REWRITEBASE}webservice/dispatcher.php?url=$1 [QSA,L]
# Images
RewriteRule ^([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$1$2$3.jpg [L]
RewriteRule ^([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$1$2$3$4.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$1$2$3$4$5.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$4/$1$2$3$4$5$6.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$4/$5/$1$2$3$4$5$6$7.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$4/$5/$6/$1$2$3$4$5$6$7$8.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$4/$5/$6/$7/$1$2$3$4$5$6$7$8$9.jpg [L]
RewriteRule ^([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])([0-9])(\-[_a-zA-Z0-9-]*)?(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/p/$1/$2/$3/$4/$5/$6/$7/$8/$1$2$3$4$5$6$7$8$9$10.jpg [L]
RewriteRule ^c/([0-9]+)(\-[\.*_a-zA-Z0-9-]*)(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/c/$1$2$3.jpg [L]
RewriteRule ^c/([a-zA-Z_-]+)(-[0-9]+)?/.+\.jpg$ %{ENV:REWRITEBASE}img/c/$1$2.jpg [L]
# AlphaImageLoader for IE and fancybox
RewriteRule ^images_ie/?([^/]+)\.(jpe?g|png|gif)$ js/jquery/plugins/fancybox/images/$1.$2 [L]
# Dispatcher
RewriteCond %{REQUEST_FILENAME} -s [OR]
RewriteCond %{REQUEST_FILENAME} -l [OR]
RewriteCond %{REQUEST_FILENAME} -d
RewriteRule ^.*$ - [NC,L]
RewriteRule ^.*$ %{ENV:REWRITEBASE}index.php [NC,L]
AddType application/vnd.ms-fontobject .eot
AddType font/ttf .ttf
AddType font/otf .otf
AddType font/woff2 .woff2
AddType application/x-font-woff .woff
<IfModule mod_headers.c>
<FilesMatch "\.(ttf|ttc|otf|eot|woff|woff2|svg)$">
Header set Access-Control-Allow-Origin "*"
</FilesMatch>
</IfModule>
#If rewrite mod isn't enabled
ErrorDocument 404 /index.php?controller=404
# ~~end~~ Do not remove this comment, Prestashop will keep automatically the code outside this comment when .htaccess will be generated again
# # BEGIN litespeed noconntimeout noabort
<IfModule Litespeed>
RewriteEngine On
RewriteRule .* - [E=noabort:1]
</IfModule>
# # END litespeed noconntimeout noabort
# php -- BEGIN cPanel-generated handler, do not edit
# Set the “ea-php70” package as the default “PHP” programming language.
<IfModule mime_module>
AddHandler application/x-httpd-ea-php70 .php .php7 .phtml
</IfModule>
# php -- END cPanel-generated handler, do not edit
# BEGIN cPanel-generated php ini directives, do not edit
# Manual editing of this file may result in unexpected behavior.
# To make changes to this file, use the cPanel MultiPHP INI Editor (Home >> Software >> MultiPHP INI Editor)
# For more information, read our documentation (https://go.cpanel.net/EA4ModifyINI)
<IfModule php7_module>
php_flag display_errors Off
php_value max_execution_time 600
php_value max_input_time 600
php_value max_input_vars 6000
php_value memory_limit 1024M
php_value post_max_size 1024M
php_value session.gc_maxlifetime 1440
php_value session.save_path "/var/cpanel/php/sessions/ea-php73"
php_value upload_max_filesize 1024M
php_flag zlib.output_compression Off
</IfModule>
<IfModule lsapi_module>
php_flag display_errors Off
php_value max_execution_time 600
php_value max_input_time 600
php_value max_input_vars 6000
php_value memory_limit 1024M
php_value post_max_size 1024M
php_value session.gc_maxlifetime 1440
php_value session.save_path "/var/cpanel/php/sessions/ea-php73"
php_value upload_max_filesize 1024M
php_flag zlib.output_compression Off
</IfModule>
# END cPanel-generated php ini directives, do not edit
The problem is the position of the noabort rule. it was placed nearly at the end of .htaccess, and as such, it is prevented from being executed by the other rules that come before it.
RewriteRule .* - [E=noabort:1]
Move the rule to the very top of all .htaccess rewrite rules, and the test script will no longer time out.